[norebro_heading subtitle_type_layout=”bottom_subtitle” module_type_layout=”on_middle” title=”U0lOR0xFJTIwdnMlMjBNVUxUSQ==” subtitle_typo=”weight~inherit”]
[norebro_heading subtitle_type_layout=”bottom_subtitle” module_type_layout=”on_left” title=”U3BlY2lmaWNhdGlvbnM=” subtitle_typo=”weight~inherit”]
| SINGLE | MULTI | |||
|---|---|---|---|---|
 |
 |
 |
 |
|
| Name | SINGLE 5 KG | SINGLE 7.5 KG | SINGLE 11 KG | MULTI 11 KG |
| Interval of periodic inspections | 10 years (according to P200, point 9 of ADR/RID:2017) | |||
| Finished Cylinder | ||||
| Height (mm) | 384 | 468 | 571 | 571 |
| Diameter without outer case: | 292 ± 3 mm | |||
| Diameter with outer case: | 310 ± 3 mm | |||
| Water Capacity | 12.5+0.15L | 18.2+0.15L | 24.4+0.15L | 24.4+0.15L |
| Container Weight (Excluding Valve) | 3.4±0.2 Kg | 4.1±0.2 Kg | 5.0±0.2 Kg | 5.0±0.2 Kg |
| Tare Weight (Including Valve) | 3.95±0.2 Kg | 4.65±0.2 Kg | 5.55±0.2 Kg | 5.65±0.2 Kg |
| LPG Capacity | 9.5 L | 14.5 L | 19.5 L | 19.5 L |
| Propane Capacity (kg) | 5 kg | 7.5 kg | 11 kg | 11 kg |
| Inlet | DIN (G12 KLF) W21.8 x 1/14 lh |
JIC type 3/4UNF male thread |
||
| Outlet | DIN (G12 KLF) (W21.8 x 1/14 lh) |
|||
| Test pressure | 30 bar | |||
| SAFETY FEATURES | ||||
| Automatic 80% cut off valve OPD (Overfill Protection Device) |
Yes | |||
| Over pressure relief valve (PRV) | Yes | |||
| Excess flow valve | Yes | |||
| Manual shut-off valve | No | Yes | ||
| Non-return valve | No | Yes | ||
| Level gauge | No | Yes | ||
| Liner | ||||
| Material | PET | |||
| Density | 1.32 - 1.4 g/cm3 | |||
| Melting point | 245 - 250 °C | |||
| Glass transition temperature | 74 - 80 °C | |||
| Auto ignition temperature | 440 - 460 °C | |||
| Min. thickness | 0.15 mm | |||
| Composite material | ||||
| Fiber type | E-glass | |||
| Min. Dry Fiber Tensile strength | 0.35 N/tex | |||
| Fiber modulus | 68 - 72 GPa | |||
| Matrix Components | Epoxy resin, Hardener, Accelerant, Diluent | |||
| Min. Tensile strength | 1400 MPa | |||
| Elongation | 2.5 -5% | |||
| Thickness | 1.5 - 4.5 mm | |||
| Metal End Boss | ||||
| Material | 11SMn30C EN 10227 | |||
| Min. Yield Stress | 245 MPa | |||
| Min. Tensile Strength | 360 MPa | |||
| Min. Elongation | 6% | |||
| Applicable Standards | ISO 11119-3:2013, ADR 2019, Directive 2010/35/EU | |||
| Approved For | UN 1011, 1075, 1965, 1969, 1978 | |||
No products in the cart.